芯片主动上报level 状态， 这样是否可以？

fff

thanks for your info. ！ But I don't have this problem using the x labs chips,.   no binding level , this chips also can send level report.

wes58

fff 发表于 2024-12-24 16:54
thanks for your info. ！ But I don't have this problem using the x labs chips,.   no binding level , ...

Well, maybe they are doing it some other way, without you having to do it. You may check their documentation.
Binding is not specific to Telink. It is specified in the Zigbee specifications.

TL_YB

Hi,
wes58的回答是正确的。
或者你也可以参考这个。

void reportTemp(void){
        epInfo_t dstEpInfo;
        TL_SETSTRUCTCONTENT(dstEpInfo, 0);

        dstEpInfo.dstAddrMode = APS_SHORT_DSTADDR_WITHEP;
        dstEpInfo.dstEp = 1;
        dstEpInfo.dstAddr.shortAddr = 0x0000;
        dstEpInfo.profileId = HA_PROFILE_ID;
        dstEpInfo.txOptions |= APS_TX_OPT_ACK_TX;//enable aps ack request

        u8 level = 127;

        zcl_report(1, &dstEpInfo, TRUE, ZCL_FRAME_SERVER_CLIENT_DIR,
                        ZCL_SEQ_NUM, MANUFACTURER_CODE_NONE,
                        ZCL_CLUSTER_GEN_LEVEL_CONTROL, ZCL_ATTRID_LEVEL_CURRENT_LEVEL,
                        ZCL_DATA_TYPE_UINT8, (u8 *)&level);
}

C

复制

fff

感谢， 有一个问题，为什么有的网关level binding 没问题，有的网关不level binding ?

wes58

You won't get an answer why it works differently on anothre manufacter chips.

That's all you have to do to bind it:


Or you can remove the references to cheking the binding table in the zcl_reporting.c

You were talking about x labs chips.
When I read here https://community.silabs.com/s/article/creating-bindings-and-reporting-entries-using-the-emberznet-cli?language=en_US it looks like the same what Telink is doing.